ISO 9001:2015 Certified · ITAR Compliant Call 216-271-5100

Resources for engineers & buyers

What you need to know to get the best quote on your stamping or fabrication project.

What you need to know to get the best quote

Short-run and medium-run metal manufacturers can produce a diverse array of parts for customers across industries and project types. In metal manufacturing, there are four main categories of processes:

  • Shearing and forming
  • Machining
  • Joining
  • Casting and molding

Shearing and forming processes are combined in what is known as metal stamping. Stamping is pressworking sheet metal to change its shape, with or without accompanying shearing or punching. Each stamping or fabricating project has its own techniques and design considerations, and each can benefit from ideas that produce more efficient, higher-quality parts.

In stamping there is no final machining away of metal. Instead, the scrap areas of a part are removed in the initial operations and the piece is created from this blank. Eliminating that additional operation reduces manufacturing costs.

Stamped parts can be found in nearly every industry. They serve many functions, from holding, joining and aligning simple shims and plates to enhancing the safety, design and stiffness of highly engineered parts used in complex enclosures and mechanical brackets. Their application is limited only by the imagination of the designer or engineer.

Short-run vs. long-run stamping

Whether you should choose short-run or long-run stamping depends on your application. If your project requires millions of identical parts with several complex forming operations, long-run stamping is likely the most economical option, as the price per part will be lower.

However, short-run stamping can save you substantial money and time. Its extremely low initial tooling costs save approximately 80% compared to conventional permanent dies in most instances. More savings come each time you change a design, as the tooling can be altered for a small fraction of the original charge. Short-run stamping also gets small quantities delivered quickly, so you can keep inventories very low. And because tooling takes a fraction of the time it takes to build permanent dies, finished stampings are produced quickly.

The advantages of short-run stamping are especially strong when you’re:

  • Designing and checking new products
  • Changing existing products
  • Supplying limited markets
  • Making pilot runs
  • Doing experimental work
  • Running parts that change design frequently
  • Meeting unusual time schedules
  • Testing the market before committing to production tooling

How to get the lowest total cost

More than any other single factor, the specifications on an engineered drawing determine the price you’ll be quoted. Consider carefully how each specification affects price, and don’t include excessive tolerances, limitations or any specification the design doesn’t require.

For example, some companies mark all prints with a tolerance of ±0.001″ for every dimension. That makes it mandatory to hold that tolerance everywhere, and may require inspecting 100% of the pieces — costing you extra when only one dimension may actually need it. Similarly, specifying materials without thinking through the part’s requirements can lead to materials that are hard to obtain, which affects whether you receive a reasonable quotation.

Apply the same care to design requirements, finishing methods, quality assurance and every other step. It’s always worth discussing your job and how your part will be used with your stamping supplier — they know the operations and shortcuts that lead to the most economical production.

Metal stamping material selection

In some cases, your design will dictate a specific material property, such as strength or conductivity, limiting your options to a few materials. In most cases, though, there will be a wide range of materials to choose from.

Start by considering these material qualities

  • Stock thickness and tolerance
  • Material strength and ductility
  • Ferrous or non-ferrous alloy
  • Whether it can be plated
  • Availability for sourcing
  • Associated material certifications
  • Cost

Most projects have only a few critical requirements, and the most commonly available materials will be right for the job. If no material meets every requirement, you may need custom-made metals from a specialty supplier — at a higher cost than mill or warehouse prices.

Pay close attention to material thickness

When material is sourced for stamping, its thickness is expected to fall within an acceptable range. These tolerances are set by mills and warehouses and are specific to the provider, the material and the thickness of the sheet, coil or bar. ASTM International publishes widely accepted standards for material production; check the current version at the time of sourcing. The table below shows a few of these standards for cold-rolled, hot-rolled, and hot-rolled pickled and oiled steel.

Based on ASTM A568
Gage #Decimal equivalent (in.)Cold-rolled steelHot-rolled & HRP&O steelLb per sq. ft.
6.1890—±0.010″7.650
7.1793±0.007″±0.010″7.500
8.1644±0.007″±0.010″6.875
9.1495±0.007″±0.010″6.250
10.1345±0.006″±0.010″5.625
11.1196±0.006″±0.010″5.000
12.1046±0.006″±0.010″4.375
13.0897±0.006″±0.008″3.750
14.0747±0.006″±0.007″3.125
15.0673±0.005″±0.006″2.812
16.0598±0.005″±0.006″2.500
17.0538±0.004″±0.006″2.250
18.0478±0.004″±0.005″2.000
19.0418±0.004″—1.750
20.0359±0.003″—1.500
21.0329±0.003″—1.375
22.0299±0.003″—1.250
23.0269±0.003″—1.125
24.0239±0.003″—1.000
25.0209±0.003″—0.875
26.0179±0.003″—0.750
27.0164±0.002″—0.688
28.0149±0.002″—0.625
29.0135±0.002″—0.562
30.0120±0.002″—0.500

What to consider after selecting a material

Once a material is chosen, a designer should be able to answer “yes” to the questions below. If you find ways to safely reduce requirements or widen tolerances, your bottom line will improve.

  • Is the part strong enough for its function?
  • Can it be assembled, disassembled and serviced economically?
  • Are all necessary symbols for finishing, grinding, etc. shown on the drawing?
  • Are locating points and proper finish allowances provided?
  • Are material and heat treatment specifications given?
  • Are plating and painting specifications given?

Most material warehouses publish current listings showing material type, thickness, width, temper and thickness tolerance. If a material is listed, it can usually be procured without delay, shortening lead time. Excessively tight material requirements raise sourcing costs and can sink a project — so talk with your supplier about how the part will be used.

Get started with a RapidQuote

Send us your drawing or part. We'll find the lowest total cost.